Oh no! You've dropped your digital stuff. And it's out of warranty. And repair costs more than the digital stuff is worth. What to do short of tossing the digital stuff (or selling on ebay)? Well, believe it or not the average person has a good chance of diy fixing that digital stuff themselves. All they'll need for most cases is some patience, and a little background knowledge. The intent of the posts on this blog are to help provide that knowledge.

Disclaimer Warning: The following instructions are given without any warranty. They don't have to be complete or correct. Don't do any of the following steps if you're not sure of what you're doing. You could damage your digital stuffs and you WILL lose your warranty. Everything you do will be at your own risk.

Disclaimer Notice : imprtant things to know before you start taking Part your digital stuffs

Friday, August 7, 2009

Nokia 6120 Classic disassembly

Nokia 6120 Classic disassembly
Tools required: Torx 6 screwdriver, plastic tool such as a credit card or guitar plectrum

First remove the battery cover, battery and memory card.

Run your plastic tool around the edge of the join of the front cover to release it.

You should now have the front cover removed. Remove the six screws you can see.

Lift the main body of the phone away from the rest of the housing.

Lift the LCD frame away slightly. It will still be attached by a ribbon at the bottom so don't try and remove it completely, just lift it up enough that you can access the circled ribbon connector. This attaches like a plug and socket. Just lever this up to unplug it.

You should now have the LCD screen removed. Reverse the whole procedure for reassembly.

No comments:

Post a Comment