Tools required: Torx 6 screwdriver
Remove the back cover, battery and two screws you can see
Lift the aerial cover away from the phone. This requires a little force
Your phone will now be in two parts, like below. Remove the two screws you now have access to at the top of the phone
Now run your fingernail all the way round the edge of the front cover to release it
You've now removed the front cover. The circuit board, which the screen is attached to, is held in place by clips all the way round the edge of the phone's chassis. You need to try and unclip these and lift the circuit board away from the chassis at the same time
Lift the circuit board away from the phone and you'll be able to unclip the LCD frame (the black part) from the circuit board
The LCD screen is now released and can be replaced. Reverse the whole procedure for reassembly
Replace the LCD and reverse the whole procedure for reassembly
No comments:
Post a Comment