Oh no! You've dropped your digital stuff. And it's out of warranty. And repair costs more than the digital stuff is worth. What to do short of tossing the digital stuff (or selling on ebay)? Well, believe it or not the average person has a good chance of diy fixing that digital stuff themselves. All they'll need for most cases is some patience, and a little background knowledge. The intent of the posts on this blog are to help provide that knowledge.

Disclaimer Warning: The following instructions are given without any warranty. They don't have to be complete or correct. Don't do any of the following steps if you're not sure of what you're doing. You could damage your digital stuffs and you WILL lose your warranty. Everything you do will be at your own risk.

Disclaimer Notice : imprtant things to know before you start taking Part your digital stuffs

Saturday, August 15, 2009

Sony Ericsson K800i disassembly

Sony Ericsson K800i disassembly

Tools required: Torx 6 screwdriver, Size 0 Phillips screwdriver
  • Remove the two screws at the bottom of the phone with the torx 6 screwdriver. Remove the other two screws with the Phillips screwdriver
Lift the antenna cover away from the phone. It unclips at the top of the phone and needs a little force to remove

Remove the two torx 6 screws at the top of the phone which are revealed after removing the antenna cover

Pull the front cover away at each side so that it releases

The phone will now be in two parts, as below

Wiggle and pull the keypad assembly up, away from the phone and it will pop off

The screen assembly is held on by two clips at each side of the phone, indicated below. Unclip them to remove the screen assembly

Unclip the ribbon which hold the screen assembly to the circuit board of the phone. It attaches like a plug and socket

Detach the retaining clips on each side of the screen assembly

Remove the faulty screen and replace with the new screen

Reverse the whole procedure for reassembly

No comments:

Post a Comment