PLEASE READ THIS FIRST !

Oh no! You've dropped your digital stuff. And it's out of warranty. And repair costs more than the digital stuff is worth. What to do short of tossing the digital stuff (or selling on ebay)? Well, believe it or not the average person has a good chance of diy fixing that digital stuff themselves. All they'll need for most cases is some patience, and a little background knowledge. The intent of the posts on this blog are to help provide that knowledge.

Disclaimer Warning: The following instructions are given without any warranty. They don't have to be complete or correct. Don't do any of the following steps if you're not sure of what you're doing. You could damage your digital stuffs and you WILL lose your warranty. Everything you do will be at your own risk.

Disclaimer Notice : imprtant things to know before you start taking Part your digital stuffs

Sunday, August 9, 2009

Sagem MYV-55 disassembly

Sagem MYV-55 disassembly

Tools required: Torx 5 screwdriver.

First remove the battery cover and battery. Pull the two circled clips out and you'll then be able to remove the front cover.

Remove the six screws you can see and separate the phone into another two layers.

Your phone will now look like below. The ribbon connector (circled) needs to be disconnected. This attaches like a plug and socket. Simply lever it up, away from the phone, to unplug it. The metal LCD frame will now be loose.

Your phone should now look like below. Four clips hold the LCD screen in the frame (circled). Bend these back a little to release the LCD screen.

You have now removed the LCD screen. Reverse the whole procedure for reassembly.

Posted by at
Labels: , ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)