Oh no! You've dropped your digital stuff. And it's out of warranty. And repair costs more than the digital stuff is worth. What to do short of tossing the digital stuff (or selling on ebay)? Well, believe it or not the average person has a good chance of diy fixing that digital stuff themselves. All they'll need for most cases is some patience, and a little background knowledge. The intent of the posts on this blog are to help provide that knowledge.

Disclaimer Warning: The following instructions are given without any warranty. They don't have to be complete or correct. Don't do any of the following steps if you're not sure of what you're doing. You could damage your digital stuffs and you WILL lose your warranty. Everything you do will be at your own risk.

Disclaimer Notice : imprtant things to know before you start taking Part your digital stuffs

Sunday, August 9, 2009

Nokia N95 disassembly

Nokia N95 disassembly

Tools required: Torx 5 screwdriver

First remove the battery cover, battery and memory card. Move the slider down and remove the two screws you see.

Now move the slider up and remove the two screws at the top of the phone.

Run your fingernail along the edge of the join of the front cover to unclip it.

You should now have the front cover removed. The keypad should be loose as well.

Flip the keypad part back to access the ribbon which connects the LCD to the phone.

To remove the ribbon, flip back the metal hinge and then simply pull the screen back and the ribbon will be released.

Pull the LCD in the direction shown.

ur phone should look like below and you can replace the LCD. Reverse the whole procedure for reassembly

No comments:

Post a Comment