PLEASE READ THIS FIRST !

Oh no! You've dropped your digital stuff. And it's out of warranty. And repair costs more than the digital stuff is worth. What to do short of tossing the digital stuff (or selling on ebay)? Well, believe it or not the average person has a good chance of diy fixing that digital stuff themselves. All they'll need for most cases is some patience, and a little background knowledge. The intent of the posts on this blog are to help provide that knowledge.

Disclaimer Warning: The following instructions are given without any warranty. They don't have to be complete or correct. Don't do any of the following steps if you're not sure of what you're doing. You could damage your digital stuffs and you WILL lose your warranty. Everything you do will be at your own risk.

Disclaimer Notice : imprtant things to know before you start taking Part your digital stuffs

Sunday, August 23, 2009

Installing iPod Mini Bottom Bezel

Installing iPod Mini Bottom Bezel

The plastic part on the bottom of the iPod.

Tools used in this guide : Small Flathead Screwdriver
Parts relevant to this guide : iPod Mini Bottom Bezel

Step 1 — Top Bezel
Before opening your iPod, ensure that the hold switch is in the locked position.

Step 2
Carefully insert a small flathead screwdriver in the seam between the metal casing and white plastic top. Use the screwdriver to pry up the white plastic top bezel. Be careful not to damage the soft plastic with your screwdriver.
The top bezel is held on with an adhesive, so it may be necessary to pry up in several different locations to free the part.

Step 3
Lift the top bezel off of the iPod.

Congratulations!
To reassemble your device, follow these instructions in reverse order.
Posted by at
Labels: , , , ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)