PLEASE READ THIS FIRST !

Oh no! You've dropped your digital stuff. And it's out of warranty. And repair costs more than the digital stuff is worth. What to do short of tossing the digital stuff (or selling on ebay)? Well, believe it or not the average person has a good chance of diy fixing that digital stuff themselves. All they'll need for most cases is some patience, and a little background knowledge. The intent of the posts on this blog are to help provide that knowledge.

Disclaimer Warning: The following instructions are given without any warranty. They don't have to be complete or correct. Don't do any of the following steps if you're not sure of what you're doing. You could damage your digital stuffs and you WILL lose your warranty. Everything you do will be at your own risk.

Disclaimer Notice : imprtant things to know before you start taking Part your digital stuffs

Showing posts with label LG. Show all posts
Showing posts with label LG. Show all posts

Monday, August 3, 2009

LG U880 disassembly


LG U880 disassembly
Tools required: Phillips size 0 screwdriver
Turn your phone over so the back is facing you. Remove the battery. Now remove the 4 screws (circled below)

Remove the 2 screws (circled below). These screws may be covered by some plastic covers. These simply peel off.

Next remove the 2 rubber stoppers & screws above the main screen (circled below)

Now remove the two screws below the main screen (circled below)

Run a fingernail along the join of the housing to unclip it

The top of the phone should now be in two pieces, as below

Unclip the ribbon circled below. This attaches like a plug and socket

Now detach the top of the phone from the bottom. This involves a little force as it is a tight fit

Double back the ribbon on itself so it is away from the LCD screen

Use the screwdriver to lever the old screen out

Replace the old screen with new and reverse the whole procedure for reassembly


LG U8110, U8120, U8130 disassembly

LG U8110, U8120, U8130 disassembly
Tools required: T5 screwdriver

Turn your phone over so the battery cover is facing you. Remove the battery cover and battery. Next remove the 2 rubber stoppers (circled below) and unscrew the aerial.

  • Remove the 6 screws (circled below)

  • Next remove the 2 rubber stoppers & screws above the main screen (circled below)

    Prise the back part away from the rest of the phone by running your fingernail between where the two parts meet (as shown below)

    Your phone should now look like the picture below. Unclip the ribbon (circled below)

    After removing the ribbon cable (above), carefully lift the metal part indicated by the arrow above. Another ribbon will be attached which should be carefully removed. Take the circuit board & keypad out and you'll be left with what's below. Next remove the top part of the phone by pushing the housing in whilst pulling the hinge, which the top part is attached via, away from the phone. This is the hardest part and you'll need to bend and manipulate the housing the get the hinge out. Be firm but be careful so you don't snap the housing.

    Your phone will now be in two parts. To open the top half of the phone and get to the screen, run your fingernail fingernail between where the two parts of the housing meet (as shown below)

    Your phone should now be as pictured below. The circled areas indicate where you'll need to remove the speaker and ringer in order to solder them to the new screen. The screen can be lifted away from the phone easily at this point.

    Remove the LCD and replace with new. Reverse the procedure for disassembly and it's finished.

    Sunday, August 2, 2009

    LG Viewty KU990 disassembly

    LG Viewty KU990 disassembly
    Tools required: Phillips size 0 screwdriver

    Remove the battery cover and battery to allow access to six screws. Remove these screws.

  • You can now remove back part of the phone. It should come away from the phone with a little force.
  • You should now have the back part removed, like below. Remove the camera module. Wiggle it around and it'll release.

    Now lift the circuit board away from right to left, as shown below. It's held in place quite tightly. The board will still be attached by a few ribbon on the left side.

    Unclip the grey part from right to left, shown below, to reveal another ribbon (circled). This attaches like a plug and socket. Simply lift it up to unplug it

    Your phone should now look like the picture below.

    Now remove the lens which covers the screen. It is held on with a tacky glue and will require some force to remove it.

    Your phone should now look like the image below.

    The LCD screen and frame are stuck into the front of the phone by a tacky glue so carefully peel it them away (you don't want to bend the frame as you'll need to put the new screen in this).

    Now remove the LCD screen from the metal frame and replace with new. Reverse the whole procedure for reassembly.

    LG KS360 disassembly

    LG KS360 disassembly
    Tools required: Phillips size 0 screwdriver, plastic tool such as a guitar plectrum or credit card.

    Remove your back cover, battery, sim and memory card. Remove the six screws you can see.

    Slide something like a credit card in-between the housing and battery compartment, as shown below. This will release the back part of the phone.

    With the back of the housing removed, your phone should look like below.

    Lift the circuit board up at the bottom, then flip it over from left to right.

  • The circled connector needs to be disconnected. It attaches like a plug and socket. Just lever it away from the circuit board to unplug.
  • You can now lift the circuit board away from the rest of the phone, as shown below. Remove the four screws you now have access to and you'll be able to lift another layer of the housing away.

  • Your phone should now look like below. Six screws need to be removed. Three of these screws will be covered with small blue stickers. Just lift them off with your screwdriver. They're not needed so don't worry about damaging them.
  • Now slide your plastic tool all the way around the join of the front cover to release it.

  • Your phone should now look like below. Two connectors need to be disconnected. Again, these attach like a plug and socket. Just lever each one up to unplug.
  • Flip the keypad membrane up and then slide your plastic tool under the LCD screen. It will be stuck down lightly.
  • You should now have the LCD screen removed. Peel off the green sticker, indicated by the arrow. Another ribbon needs to be disconnected. Release this by flicking the brown latch back and then pull the screen away from the green circuit board.

    You should now have the LCD screen removed completely. Reverse the whole procedure for reassembly.

    LG Cookie KP500 disassembly

    LG Cookie KP500 disassembly

    Tools required:
    Phillips size 0 screwdriver, plastic tool such as a guitar plectrum or credit card.

    Remove your back cover, battery, sim, memory card and stylus. Four screws need to be removed (circled).

    Run something like a credit card around the join of the back cover to release it from the rest of the phone.

    With the back cover removed your phone should look like below. Five ribbon connectors (circled) need to be disconnected. Each one attaches like a plug and socket. Just lever them up to unplug.

    With the ribbons disconnected you should be able to pull the circuit board away, as shown below. Another connector needs to be detached in the same way as the others.

    Your phone should now look like below. Remove the two circled screws which hold the antenna in place. The camera, indicated by the arrow, is stuck down with double sided tape and will come away with a little force. The antenna will also come away with a little force.

    Your phone should now look like below.

    Run your plastic tool around the join of the front cover and lever it off.

    Your phone should now look like below. Lever the LCD screen out with your plastic tool. It should come away easily.

  • You should now have the small LCD screen removed. Reverse the whole procedure for reassembly.