PLEASE READ THIS FIRST !

Oh no! You've dropped your digital stuff. And it's out of warranty. And repair costs more than the digital stuff is worth. What to do short of tossing the digital stuff (or selling on ebay)? Well, believe it or not the average person has a good chance of diy fixing that digital stuff themselves. All they'll need for most cases is some patience, and a little background knowledge. The intent of the posts on this blog are to help provide that knowledge.

Disclaimer Warning: The following instructions are given without any warranty. They don't have to be complete or correct. Don't do any of the following steps if you're not sure of what you're doing. You could damage your digital stuffs and you WILL lose your warranty. Everything you do will be at your own risk.

Disclaimer Notice : imprtant things to know before you start taking Part your digital stuffs

Showing posts with label 6500. Show all posts
Showing posts with label 6500. Show all posts

Saturday, August 8, 2009

Nokia 6500 Slide disassembly

Nokia 6500 Slide disassembly

Tools required: Torx 5 screwdriver

First remove the battery cover & battery. Remove the four screws you see in the battery compartment.

Run your fingernail around the join of each side of the slide and it'll release slightly.

Now use something like a credit card to lift the keypad up.

The front part of the phone will still be connected by a ribbon which attaches like a plug and socket. Use your credit card to lever it off. You'll now be able to lift the top part away from the rest of the phone.

With the two parts separated your phone will look like the picture below.

Turn the top half of the phone over. Pull the keypad part away from the rest of the phone. It's held in place with double sided tape. You'll then have two parts like below. Remove the two screws at the top of the phone

Now push the slider back up and you'll be able to remove two screws at the bottom of the phone.

You can now remove the metal plate, as shown below.

The LCD screen will now only be attached by a ribbon. The ribbon attaches like a plug and socket. Just lift it up to unplug it.

Lift the screen towards you as shown below. The big ribbon on the back of the screen is held on with double sided tape. Just peel it away so the screen is freed.

You have now removed the LCD screen. Reverse the whole procedure for reassembly.

Nokia 6500 Classic disassembly

Nokia 6500 Classic disassembly

Tools required: Torx 5 screwdriver & small flat head screwdriver or some kind of metal lever

First remove the battery cover, battery and memory card.

Run your fingernail around the edge of the join of the top cover to unclip it then remove this part.
Now remove the camera surround. It'll be stuck down with double sided tape so just peel it away. Also remove the clear camera window, indicated by the arrow. Your phone should now look like below

Push the front cover up the remove it. It'll just slide off.

Your phone will now look like below.

Use a metal lever like a flat head screwdriver to pop the LCD frame out. Use the lever on both sides of the phone.

Pull the LCD frame towards you. You'll now be able to access five screws which hold a metal plate in place. Unscrew these and lift away the metal plate to access the connector from the LCD. The LCD will still be attached to the phone at the bottom by a ribbon which attaches like a plug and socket. Just lift this up to unplug it.

You'll now have the LCD frame (and LCD) removed.

The LCD will easily pop out of the frame and allow you to replace it. Reverse the whole procedure for reassembly.

Tuesday, July 28, 2009

Nokia 6500 Classic disassembly

Nokia 6500 Classic disassembly

Tools required: Torx 5 screwdriver & small flat head screwdriver or some kind of metal lever

First remove the battery cover, battery and memory card.

Run your fingernail around the edge of the join of the top cover to unclip it then remove this part.

Now remove the camera surround. It'll be stuck down with double sided tape so just peel it away. Also remove the clear camera window, indicated by the arrow. Your phone should now look like below

Push the front cover up the remove it. It'll just slide off.

Your phone will now look like below.

Use a metal lever like a flat head screwdriver to pop the LCD frame out. Use the lever on both sides of the phone.

Pull the LCD frame towards you. You'll now be able to access five screws which hold a metal plate in place. Unscrew these and lift away the metal plate to access the connector from the LCD. The LCD will still be attached to the phone at the bottom by a ribbon which attaches like a plug and socket. Just lift this up to unplug it.

You'll now have the LCD frame (and LCD) removed.

The LCD will easily pop out of the frame and allow you to replace it. Reverse the whole procedure for reassembly.